0

Cotizar / Comprar

Pago en línea

TYG PA2450
VER MÁS
Marcas
TYG PA2450
POTENCIAS
TYG
REF. PA2450
Amplificador de 2 canales, 500 watts/canal a 8Ω, 750 watts/canal a 4Ω, 1200 watts/canal a 2Ω
1080000
$1.080.000 COP

Cotizar / Comprar

clients img
Valoración

 

Product Description

The PA2450B provides professional quality performance and flexibility!

Professional performance and power in a strong, compact chassis. This amplifier is considered as heavy duty” as it offers superior quality for extended periods. It delivers true studio-quality sound with ultra-low distortion and a ruler-flat frequency response, perfectly suited for subwoofer-type applications.

 

STEREO MODE (Both Channels Driven)
8 ohms
FTC 20 Hz – 20 kHz, 0.1% THD 450 W
EIA 1 kHz, 0.1% THD 500 W
4 ohms
FTC 20 Hz – 20 kHz, 0.1% THD 650 W
EIA 1 kHz, 0.1% THD 750 W
2 ohms
EIA 1 kHz, 1% THD 1200 W
BRIDGE MONO MODE
8 ohms
FTC 20 Hz – 20 kHz, 0.1% THD 1300 W
EIA 1 kHz, 0.1% THD 1500 W
4 ohms 
EIA 1 kHz, 1% THD 2400 W
 
Signal to Noise, 20 Hz-20 kHz: 100 dB
Distortion (SMPTE-IM): Less than 0.02%
Input Sensitivity @ 8 ohms: 1.23V (+4.0 dBu)
Voltage Gain: 50x (34 dB)
Output Circuitry: Class H
Power Requirements
1/8 power pink noise at 4 ohms *
7A
OTHER FEATURES
Distortion (Typical)
20 Hz – 20 kHz: 10 dB below rated power Less than 0.03% THD, 4 and 8 ohms
1.0 kHz and below: full rated power Less than 0.03% THD, 4 and 8 ohms
Frequency Response: 20   Hz-20 kHz, ±1 dB
-3 dB points: 5 Hz – 50 kHz
Damping Factor, 1 kHz and below: Greater than 300 at 8 ohms
Input Impedance: 10k ohms unbalanced, 20k ohms balanced
Input Clipping: 10 Vrms (+22 dB)
Cooling: Continuously variable-speed fan, rear-to-front air flow
Connectors, each channel: Input: Active balanced; barrier strip, XLR and 1/4″ (6.3mm)
TRS tip and XLR (pin 2 positive)
Output: touch-proof binding posts and Neutrik® Speakon®
Controls: Front: AC switch, Ch. 1 and Ch. 2 gain knobs
Rear: 10-position DIP switch
Indicators: Power-On: Green LED
Signal: Yellow LED (1 per channel)
Clip: Red LED (1 per channel)
Amplifier Protection: Stable into reactive or mismatched loads
Load Protection: On/off muting, AC coupling (850, 1450), triac crowbar (1850HD, 2450, on each channel)
Power Requirements: 100, 120, 230 VAC, 50-60 Hz
Dimensions: 19″ (48.3 cm) rack mounting, 3.5″ (8.9 cm) tall (2 RU),
15.9″ (40 cm) deep (rack mounting to rear support ears)
Weight: 44.5 lbs (20.2 kg) net
Últimos videos