AUDÍFONOS
Cables y conectores
COVID19
DJ
Equipos de Audio
Equipos de Luces
ESTRUCTURAS METALICAS
Estudios de grabacion
Instrumentos Musicales
MESAS DE MEZCLAS
MICROFONOS
PARLANTES SUELTOS
PROCESADORES DE SEÑAL
RACK-STANDS-ACCESORIOS
SISTEMAS DE GRABACION
SISTEMAS DE MONITOREO
SONIDO AMBIENTAL
VIDEO
TYG PA2450
POTENCIAS
TYG
REF. PA2450
Amplificador de 2 canales, 500 watts/canal a 8Ω, 750 watts/canal a 4Ω, 1200 watts/canal a 2Ω
Product Description
The PA2450B provides professional quality performance and flexibility!
Professional performance and power in a strong, compact chassis. This amplifier is considered as heavy duty” as it offers superior quality for extended periods. It delivers true studio-quality sound with ultra-low distortion and a ruler-flat frequency response, perfectly suited for subwoofer-type applications.
| STEREO MODE (Both Channels Driven) | |
| 8 ohms | |
| FTC 20 Hz – 20 kHz, 0.1% THD | 450 W |
| EIA 1 kHz, 0.1% THD | 500 W |
| 4 ohms | |
| FTC 20 Hz – 20 kHz, 0.1% THD | 650 W |
| EIA 1 kHz, 0.1% THD | 750 W |
| 2 ohms | |
| EIA 1 kHz, 1% THD | 1200 W |
| BRIDGE MONO MODE | |
| 8 ohms | |
| FTC 20 Hz – 20 kHz, 0.1% THD | 1300 W |
| EIA 1 kHz, 0.1% THD | 1500 W |
| 4 ohms | |
| EIA 1 kHz, 1% THD | 2400 W |
| Signal to Noise, 20 Hz-20 kHz: | 100 dB |
| Distortion (SMPTE-IM): | Less than 0.02% |
| Input Sensitivity @ 8 ohms: | 1.23V (+4.0 dBu) |
| Voltage Gain: | 50x (34 dB) |
| Output Circuitry: | Class H |
| Power Requirements 1/8 power pink noise at 4 ohms * |
7A |
| OTHER FEATURES | |
| Distortion (Typical) | |
| 20 Hz – 20 kHz: 10 dB below rated power | Less than 0.03% THD, 4 and 8 ohms |
| 1.0 kHz and below: full rated power | Less than 0.03% THD, 4 and 8 ohms |
| Frequency Response: | 20 Hz-20 kHz, ±1 dB -3 dB points: 5 Hz – 50 kHz |
| Damping Factor, 1 kHz and below: | Greater than 300 at 8 ohms |
| Input Impedance: | 10k ohms unbalanced, 20k ohms balanced |
| Input Clipping: | 10 Vrms (+22 dB) |
| Cooling: | Continuously variable-speed fan, rear-to-front air flow |
| Connectors, each channel: | Input: Active balanced; barrier strip, XLR and 1/4″ (6.3mm) TRS tip and XLR (pin 2 positive) Output: touch-proof binding posts and Neutrik® Speakon® |
| Controls: | Front: AC switch, Ch. 1 and Ch. 2 gain knobs Rear: 10-position DIP switch |
| Indicators: | Power-On: Green LED Signal: Yellow LED (1 per channel) Clip: Red LED (1 per channel) |
| Amplifier Protection: | Stable into reactive or mismatched loads |
| Load Protection: | On/off muting, AC coupling (850, 1450), triac crowbar (1850HD, 2450, on each channel) |
| Power Requirements: | 100, 120, 230 VAC, 50-60 Hz |
| Dimensions: | 19″ (48.3 cm) rack mounting, 3.5″ (8.9 cm) tall (2 RU), 15.9″ (40 cm) deep (rack mounting to rear support ears) |
| Weight: | 44.5 lbs (20.2 kg) net |
